Note: 192.168.100.1 is another most used login IP address by routers. You can give it a try if you fail to access your router login page using 192.168.9.120 ! Cheers !
Login Steps for 192.168.9.120
- The first step, Open any web browser type http://192.168.9.120, and press enter
- Then Enter the default username and password, If you don’t know the default username-password then check our below table for router default username and password.
- Enter the correct username and password,
- The router admin panel will be open you have modified your router’s admin panel and changed your router username and password.
Default Router Username and Password List
You haven\’t changed your router\’s username and password? Good! The following list provides the Default Credentials. Click your router from the List:
|Router Brand||Login IP||Username||Password|
What steps are to be taken if you forget your router username and password?
In general, you can apply the password and username given by your router. If this isn’t the case, then you must handle the situation in a different way. This case applies to those who forgot their password once after changing it.
- Reset the router by holding the button for about 30 seconds which locates at the back end. To reset, you need a needle or something else that can pass through the small hole.
- once after 30 seconds, you can take off your needle and let the system reboot.
- Rebooting the system will erase the data on the router that is set by you (like username and password of it) and it returns to the normal state containing the default username and password. Now, type the router’s default username and password from the user manual or from our list.
Once after entering the ADSL router panel, change the default settings of the router to secure your network. Apply a new password and username that should be known only by you. This prevents others from accessing your router IP address without your permission.
What is 192.168.9.120 IP?
At the moment every human being has an address through which he can be traced, similarly, every machine in the internet world has an address by which we can recognize him. This address is called an IP Address. Every machine has a unique IP Address Through which it is connected to the unique network. 192.168.9.120 is a private IP Address that is used for routers. Two types of IP versions are mostly used at this time, Which are IPV4 and IPV6. 192.168.9.120 is IPV4( version 4 IP) type IP address. The full form is a Unique identifier address. IPV4 uses 32 binary bits to create a single IP address. IPV$ is expressed by four numbers separated by dots.
The purpose of using 192.168.9.120?
192.168.9.120 is a default IP address that is booked for the modem or wireless routers to identify themself on the private network. This IP address is used as the default address for various router brands. Home uses or small business routers are used at 192.168.1.1 IP addresses. This IP address is a C class IP address, it is 24 bits and this type of IP address starts 192.0.0.0 to 184.108.40.206. This is a 4 generation IP address. If you enter 192.168.9.120 in your browser’s address bar to access your router’s admin interface. The main reason to use the IP is to connect to the internet, change password, see the time period of your internet pack, etc.